Download command
wget --output-document=/dev/null http://host/disk.img
Clients
T510 fedora Wired
HTTP request sent, awaiting response... 200 OK
Length: 1073741824 (1.0G) [application/octet-stream]
Saving to: ‘/dev/null’
20% [===> 224,403,456 50.7MB/s eta 16s
T510 fedora wireless with airlink wireless N
HTTP request sent, awaiting response... 200 OK
Length: 1073741824 (1.0G) [application/octet-stream]
Saving to: ‘/dev/null’
0% [ ] 4,665,175 869KB/s eta 19m 42
OLPC using usb 10/100 linksys
HTTP request sent, awaiting response... 200 OK
Length: 1073741824 (1.0G) [application/octet-stream]
Saving to: ‘/dev/null’
0% [ ] 3,056,447 809KB/s eta 22m 38s
Odroidu2 Wired (10/100 NIC)
HTTP request sent, awaiting response... 200 OK
Length: 1073741824 (1.0G) [application/octet-stream]
Saving to: ‘/dev/null’
5% [=======> ] 63,779,235 11.2MB/s eta 86s
Rpie Wired (10/100 NIC)
HTTP request sent, awaiting response... 200 OK
Length: 1073741824 (1.0G) [application/octet-stream]
Saving to: `/dev/null'
2% [==> ] 29,108,451 6.22M/s eta 2m 31s
Readynas Wired (GB NIC)
HTTP request sent, awaiting response... 200 OK
Length: 1073741824 (1.0G) [application/octet-stream]
Saving to: `/dev/null'
0% [> ] 8,814,592 1.79M/s eta 9m 33s
Netgear Stora Wired (GB NIC)
HTTP request sent, awaiting response... 200 OK
Length: 1073741824 (1.0G) [application/octet-stream]
Saving to: `/dev/null'
17% [===========> ] 192,380,928 39.7M/s eta 22s
wdlive wifi airlink wireless N ( went from 200k to 800K)
HTTP request sent, awaiting response... 200 OK
Length: 1073741824 (1.0G) [application/octet-stream]
Saving to: `/dev/null'
1% [> ] 13,298,607 569K/s eta 32m 31s
wdlive hard wire (cat 6 cable)
HTTP request sent, awaiting response... 200 OK
Length: 1073741824 (1.0G) [application/octet-stream]
Saving to: `/dev/null'
1% [ ] 11,470,775 1.08M/s eta 15m 31s
What did all this tell me. That my wifi card on airlink wireless N sucks, and that I need to tweak my wifi settings a lot. Another note the wdlive box has terrible network performance
2 comments:
This is awesome!
Thanks, Still not 100% happy with my speeds yet.
Post a Comment